Cekol DL-K Primer concentrare

  • Penetrates deeply
  • Decreases absorption
  • Stabilizes the substrate
  • Improves adhesion
Cekol DL-K MAX


• Used for priming absorbable mineral substrates before smoothing and levelling the substrate, before gluing ceramic tiles, etc.
• Used for priming surfaces for painting in accordance with the paint manufacturer’s instructions.
• Reinforces the substrate and equalises its absorption capacity, improves the bonding uniformity of used materials, increases their adhesion to the substrate as well as their strength
• Prevents harmful chemical reactions between gypsum and cement
• Can be used inside and outside buildings and is non-toxic and non-flammable.
• After drying, the product creates a transparent, slightly glossy coating, resistant to water and alkaline agents. The coating does not inhibit the exchange of water vapour and gases with the environment.
• Water-soluble acrylic resin concentrate with low molecular weight used to prepare deep penetrating primer.

Instructions for use

Preparation of the substrate

Using a spatula, remove the emulsion or oil paint residues and loose grains of sand. The substrate should be clean, tight and free of grease.

Preparation of the primer

Dilute 0.5 litres of the concentrate with water according to the intended use, using 2 to 5.5 litres of water. In order to obtain deep penetrating primer CEKOL DL-80, add 2 litres of water for each 0.5 litre of concentrate. In order to obtain universal primer or primer for painting, add 5.5 litre of water for each 0.51 litre of concentrate.


After diluting the concentrate, the product is to be applied with brush, roller or spray. Depending on the degree of dilution and absorption capacity of the substrate, priming can be repeated after drying of the first layer.

Technical data

  • It meets the requirements of PN-C-81906:2003
  • Content of dry residue after dilution in 2 litres of water 10 ±0.5%
  • Drying time; depending on the temperature and humidity ~2 h
  • Consumption from 1 litre after dilution; depending on the absorption capacity of the substrate 5 ÷ 15 m²
  • Application and substrate temperature +5 ÷ +25 °C

+48 801 623 565

Zapisz się!